Call Us Now: +1 202-388-0050
Beds
Sort by:
Default
Show:
12 Products per page
BED PKG SE ROLL FOAM MAT HR LUMEX
$1,092.00
BED PKG SE ROLL FOAM MAT HR LUMEX
1 Beds
Introducing the new Patriot Semi-Electric Homecare Bed with a grid sleep surface! Designed and engineered by the same team who develop the GF Long Term Care beds. Sleep surface and motors are MADE IN THE USA!
The motor unit and bed design provide the ultimate in quiet, smooth operation.
Complete welded steel frame construction.
The head and foot sections can be raised or lowered simultaneously or independently with one hand control.
During a power failure the motor unit can lower both the head and foot section with just a single standard 9 volt battery.
Assembles easily with just five components.
Designed to meet the requirements of applicable HCPCS codes.
Total bed weight assembled: 166 lb (bed and motor only).
Available with Fiberboard Decorative Walnut Bed-ends or
High-impact Plastic Bed-ends.
Maximum patient weight 350 lbs.
450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
Bed Height: Min. 15";, Max. 24"; (at deck level).
Lift Range: Head – 60°, Knee – 30°.
Overall Bed Size: 87"; L x 36"; W.
No external pinch points!
Slots in frame to ensure proper rail placement.
Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84"; with one kit, 88"; with 2 kits.
The only homecare bed to offer optional corner mattress retainers .
Grid Deck offers the following advantages:
Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.
Warranty:
Two year warranty for defects in workmanship and materials of mechanical components, frame, and electronics.
During the warranty period, defective items will be repaired or replaced at manufacturer’s option. The warranty does not include any labor charges incurred in replacement part(s) installation or any associated freight or shipping charges to the manufacturer.
Bed shipped in three cartons:
1. Foot section and motor. 2. Head section and Hi/Lo rod. 3. Bed end set.
Learn More$1,092.00
- Availability: in stock
US0208-RFPKGHR
BED RAILS LBRTY HALF NO GAP HI NON-CLAMP ON
1 Beds
The Half No-Gap Head Rail, which provides a full head coverage of 31.5 inches, extends to eliminate the gap between the head board and the end of the rail. The non-telescoping tube overlap results in a very sturdy rail that can be used as a secondary handle and support. Designed to offer added protection, the Lumex Liberty Rails follow the FDA Hospital Bed System Dimensional Guidance to Reduce Entrapment and the Hospital Bed Safety Workgroup and FDA Dimensional Test Methods for Bed System Zones 1-4 to reduce bed entrapment. Features:
Improved rail design decreases the spacing between the crossbars, thus reducing the risk of entrapment
New bed rail length closes open areas that can occur during full bed articulation
Rails now mount in fixed patent pending rail slots on Patriot™ bed deck to prevent sliding and moving — easy installation saves delivery and setup time and ensures proper rail placement
Spring-loaded, self-adjusting crossbraces feature safety tabs that prevent accidental disengagement when bumped or during application of side pressure
Patriot™ Liberty Bed Rails have been tested to the highest Medical Bed System standards
Designed to be used specifically with the Patriot™ and WhisperLite™ II full-electric beds that are commonly used as standard-height or low beds
Heavy-duty steel construction
Rails are powder-coated with an environmentally-friendly, long-lasting hammertone finish and secure gripping surface
Tool-free installation
The Half No Gap can be mounted on the bed’s head and the GF6580B-1 mounted on the bed’s foot to create the Patriot™ split rail system
3 Year Limited Warranty
Designed to meet the requirements of HCPCS E0305
Specifications
Overall length:
(full extension) 31.5";
Overall height:
17";
Product Weight:
6.7 lb per bed rail
Specifications are subject to change without notice.The information provided herein regarding recommended usage is in fact a recommendation. Please consult your healthcare professional for proper guidance and selection of homecare bed rails to best suit intended user needs.
Learn More$112.00
- Availability: in stock
GF6590BH-1
BED RAILS LBTY QUARTER RAIL HI LUMEX
1 Beds
The Quarter Rail, approximately 18 inches in length when mounted on the Patriot™ bed, can be used as a head assist, head rail, or foot rail. This rail provides minimal rail coverage and gives assistance when entering or exiting the bed. The Quarter Rail’s non-telescoping inner and outer tubes overlap in conjunction with the Patriot™ mounting system, resulting in a very sturdy rail. Designed to offer added protection, the Lumex Liberty Rails follow the FDA Hospital Bed System Dimensional Guidance to Reduce Entrapment and the Hospital Bed Safety Workgroup and FDA Dimensional Test Methods for Bed System Zones 1-4 to reduce bed entrapment.Features:
Improved rail design decreases the spacing between the crossbars, thus reducing the risk of entrapment
New bed rail length closes open areas that can occur during full bed articulation
Rails now mount in fixed patent pending rail slots on Patriot™ bed deck to prevent sliding and moving — easy installation saves delivery and setup time and ensures proper rail placement
Spring-loaded, self-adjusting crossbraces feature safety tabs that prevent accidental disengagement when bumped or during application of side pressure
Patriot™ Liberty Bed Rails have been tested to the highest Medical Bed System standards
Designed to be used specifically with the Patriot™ and WhisperLite™ II full-electric beds that are commonly used as standard-height or low beds
Heavy-duty steel construction
Rails are powder-coated with an environmentally-friendly, long-lasting hammertone finish and secure gripping surface
Tool-free installation
The Quarter Rail can be mounted on the bed’s foot and the GF6590B-1 mounted on the bed’s head to create the Patriot™ split rail system.
3 Year Limited Warranty
Designed to meet the requirements of HCPCS E0310
Specifications
Overall length:
(full extension) 18";
Overall height:
13.5";
Product Weight:
12.75 lb
Specifications are subject to change without notice.The information provided herein regarding recommended usage is in fact a recommendation. Please consult your healthcare professional for proper guidance and selection of homecare bed rails to best suit intended user needs.
Learn More$104.00
- Availability: in stock
GF6580BH-1
BED RAILS LIBERTY FULL LENGTH LUMEX
1 Beds
The Full Length Rail is a nominal, telescoping full length rail that provides maximum length rail perimeter coverage, intended for use by patients requiring maximum length rail and maximum perimeter protection. Designed to offer added protection, the Lumex Liberty Rails follow the FDA Hospital Bed System Dimensional Guidance to Reduce Entrapment and the Hospital Bed Safety Workgroup and FDA Dimensional Test Methods for Bed System Zones 1-4 to reduce bed entrapment.Features:
Improved rail design decreases the spacing between the crossbars, thus reducing the risk of entrapment
New bed rail length closes open areas that can occur during full bed articulation
Rails now mount in fixed patent pending rail slots on Patriot™ bed deck to prevent sliding and moving — easy installation saves delivery and setup time and ensures proper rail placement
Spring-loaded, self-adjusting crossbraces feature safety tabs that prevent accidental disengagement when bumped or during application of side pressure
Patriot™ Liberty Bed Rails have been tested to the highest Medical Bed System standards
Designed to be used specifically with the Patriot™ and WhisperLite™ II full-electric beds that are commonly used as standard-height or low beds
Heavy-duty steel construction
Rails are powder-coated with an environmentally-friendly, long-lasting hammertone finish and secure gripping surface
Tool-free installation
3 Year Limited Warranty
Designed to meet the requirements of HCPCS E0310
Specifications
Overall length:
44 and one half"; (full extension – 62";)
Overall height:
13.5";
Product Weight:
21.5 lb
Specifications are subject to change without notice.The information provided herein regarding recommended usage is in fact a recommendation. Please consult your healthcare professional for proper guidance and selection of homecare bed rails to best suit intended user needs.
Learn More$116.00
- Availability: in stock
GF6570B-1
BED STORAGE CART LUMEX
$68.00
BED STORAGE CART LUMEX
1 Beds
Bracket set creates a self-contained complete bed transporter
Utilizes bed ends to transport the head and foot spring sections, and other bed components
Gives storage area a neat, uncluttered appearance
Learn More$68.00
- Availability: in stock
600-1003-000
BEDPKG FE INNSP FR PL ENDS LUMEX
$1,284.00
BEDPKG FE INNSP FR PL ENDS LUMEX
1 Beds
Introducing the new Patriot Full-Electric Homecare Bed with a grid sleep surface!Designed and engineered by the same team who develop the GF Long Term Care beds.Sleep surface is MADE IN THE USA!The single-motor design homecare bed is now available in a full-electric/low version. The Patriot Full-Electric Homecare Bed offers the same features as the Patriot Semi-Electric Homecare Bed with the additional feature of electric height adjustment. This makes it easier for caregivers to raise and lower the bed for patient care and linen changes. The electric height adjustment also enables the patient to easily position the bed for maximum comfort. The Full electric model can be adjusted to be a conventional height homecare bed OR a low bed for better inventory management!
Total assembled bed weighs only 178 pounds (bed and motor).
Powerful DC motor for effortless height adjustment.
Hi-Lo motor comes pre-installed on foot section for easy
set-up and disassembly.
All functions fully-integrated into convenient
handheld pendant.
Welded motor-guard protects motor and universal joint from damage during shipment and deliveries.
Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic Bed-ends.
Designed to meet the requirements of applicable HCPCS codes.
Maximum patient weight 350 lbs.
450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
Height Adjustment:
Casters in Low Position:Min. 9.5";, Max. 20"; (at deck level)Casters in Standard Position:Min. 13";, Max. 23.5"; (at deck level)
Overall Bed Size: 87"; L x 36"; W.
Lift Range: Head – 60°, Knee – 30°.
No external pinch points!
Slots in frame to ensure proper rail placement.
Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84"; with one kit, 88"; with 2 kits.
The only homecare bed to offer optional corner mattress retainers.
Grid Deck offers the following advantages:
Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.
NOTE:
Half-Rail A (GF6650A-1 will not work on the Full-Electric Patriot homecare bed when the bed is used as a Low Bed. You would be unable to lower the rail completely.
$1,284.00
- Availability: in stock
US0458PL-PKG
BEDPKG FE REVFM FR PL ENDS LUMEX
$1,314.00
BEDPKG FE REVFM FR PL ENDS LUMEX
1 Beds
Introducing the new Patriot Full-Electric Homecare Bed with a grid sleep surface!Designed and engineered by the same team who develop the GF Long Term Care beds.Sleep surface is MADE IN THE USA!The single-motor design homecare bed is now available in a full-electric/low version. The Patriot Full-Electric Homecare Bed offers the same features as the Patriot Semi-Electric Homecare Bed with the additional feature of electric height adjustment. This makes it easier for caregivers to raise and lower the bed for patient care and linen changes. The electric height adjustment also enables the patient to easily position the bed for maximum comfort. The Full electric model can be adjusted to be a conventional height homecare bed OR a low bed for better inventory management!
Total assembled bed weighs only 178 pounds (bed and motor).
Powerful DC motor for effortless height adjustment.
Hi-Lo motor comes pre-installed on foot section for easy
set-up and disassembly.
All functions fully-integrated into convenient
handheld pendant.
Welded motor-guard protects motor and universal joint from damage during shipment and deliveries.
Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic Bed-ends.
Designed to meet the requirements of applicable HCPCS codes.
Maximum patient weight 350 lbs.
450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
Height Adjustment:
Casters in Low Position:Min. 9.5";, Max. 20"; (at deck level)Casters in Standard Position:Min. 13";, Max. 23.5"; (at deck level)
Overall Bed Size: 87"; L x 36"; W.
Lift Range: Head – 60°, Knee – 30°.
No external pinch points!
Slots in frame to ensure proper rail placement.
Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84"; with one kit, 88"; with 2 kits.
The only homecare bed to offer optional corner mattress retainers.
Grid Deck offers the following advantages:
Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.
NOTE:
Half-Rail A (GF6650A-1 will not work on the Full-Electric Patriot homecare bed when the bed is used as a Low Bed. You would be unable to lower the rail completely.
$1,314.00
- Availability: in stock
US0458PL-RFPKG
EXT KIT, WL 84″ LUMEX
$160.00
EXT KIT, WL 84″ LUMEX
1 Beds
Extends standard length bed frame from 80"; to 84";.
Complete with solid pan extension, mattress guard, and installation hardware. No additional spring length or fabric rquired.
Works with all WhisperLite beds.
Easy to install.
Learn More$160.00
- Availability: in stock
690-0084-000
FE PATRIOT BED ONLY LUMEX
$1,010.00
FE PATRIOT BED ONLY LUMEX
1 Beds
Introducing the new Patriot Full-Electric Homecare Bed with a grid sleep surface!Designed and engineered by the same team who develop the GF Long Term Care beds.Sleep surface is MADE IN THE USA!The single-motor design homecare bed is now available in a full-electric/low version. The Patriot Full-Electric Homecare Bed offers the same features as the Patriot Semi-Electric Homecare Bed with the additional feature of electric height adjustment. This makes it easier for caregivers to raise and lower the bed for patient care and linen changes. The electric height adjustment also enables the patient to easily position the bed for maximum comfort. The Full electric model can be adjusted to be a conventional height homecare bed OR a low bed for better inventory management!
Total assembled bed weighs only 178 pounds (bed and motor).
Powerful DC motor for effortless height adjustment.
Hi-Lo motor comes pre-installed on foot section for easy
set-up and disassembly.
All functions fully-integrated into convenient
handheld pendant.
Welded motor-guard protects motor and universal joint from damage during shipment and deliveries.
Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic Bed-ends.
Designed to meet the requirements of applicable HCPCS codes.
Maximum patient weight 350 lbs.
450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
Height Adjustment:
Casters in Low Position:Min. 9.5";, Max. 20"; (at deck level)Casters in Standard Position:Min. 13";, Max. 23.5"; (at deck level)
Overall Bed Size: 87"; L x 36"; W.
Lift Range: Head – 60°, Knee – 30°.
No external pinch points!
Slots in frame to ensure proper rail placement.
Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84"; with one kit, 88"; with 2 kits.
The only homecare bed to offer optional corner mattress retainers.
Grid Deck offers the following advantages:
Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.
NOTE:
Half-Rail A (GF6650A-1 will not work on the Full-Electric Patriot homecare bed when the bed is used as a Low Bed. You would be unable to lower the rail completely.
$1,010.00
- Availability: in stock
US0458
FE PATRIOT BED ONLY PL ENDS LUMEX
$1,050.00
FE PATRIOT BED ONLY PL ENDS LUMEX
1 Beds
Introducing the new Patriot Full-Electric Homecare Bed with a grid sleep surface!Designed and engineered by the same team who develop the GF Long Term Care beds.Sleep surface is MADE IN THE USA!The single-motor design homecare bed is now available in a full-electric/low version. The Patriot Full-Electric Homecare Bed offers the same features as the Patriot Semi-Electric Homecare Bed with the additional feature of electric height adjustment. This makes it easier for caregivers to raise and lower the bed for patient care and linen changes. The electric height adjustment also enables the patient to easily position the bed for maximum comfort. The Full electric model can be adjusted to be a conventional height homecare bed OR a low bed for better inventory management!
Total assembled bed weighs only 178 pounds (bed and motor).
Powerful DC motor for effortless height adjustment.
Hi-Lo motor comes pre-installed on foot section for easy
set-up and disassembly.
All functions fully-integrated into convenient
handheld pendant.
Welded motor-guard protects motor and universal joint from damage during shipment and deliveries.
Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic Bed-ends.
Designed to meet the requirements of applicable HCPCS codes.
Maximum patient weight 350 lbs.
450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
Height Adjustment:
Casters in Low Position:Min. 9.5";, Max. 20"; (at deck level)Casters in Standard Position:Min. 13";, Max. 23.5"; (at deck level)
Overall Bed Size: 87"; L x 36"; W.
Lift Range: Head – 60°, Knee – 30°.
No external pinch points!
Slots in frame to ensure proper rail placement.
Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84"; with one kit, 88"; with 2 kits.
The only homecare bed to offer optional corner mattress retainers.
Grid Deck offers the following advantages:
Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.
NOTE:
Half-Rail A (GF6650A-1 will not work on the Full-Electric Patriot homecare bed when the bed is used as a Low Bed. You would be unable to lower the rail completely.
$1,050.00
- Availability: in stock
US0458PL
HOME BED ASSIST RAIL LUMEX
$85.00
HOME BED ASSIST RAIL LUMEX
1 Beds
Learn More
The Lumex Home Bed Assist Rail offers assistance to the patient/resident for getting in and out of a home style bed.
Can be used on either side of the bed for assistance for getting in and out of home style bed
Strong, steel construction powder-coated finish makes it durable and easy to clean
Cushioned handle that is adjustable in height assists with getting in and out of bed
Easily slides in between mattress and bed frame with added feature of an anti-slip foam on base bar and securing strap
Extendable legs that touch the floor provide added stability
Tool-free assembly
1 Year Limited Warranty
Specifications
Height adjustment from floor to top of handle
33.5"; – 42.5";
Height adjustment from mattress base to top of handle
19"; – 21";
Height adjustment from floor to base tubing support under mattress
15"; – 22";
Length of rail base tubing support under mattress
43";
Overall width of handle
20";
Product weight
7.5 lb
$85.00
- Availability: in stock
GF6800
PAT LX FULL HC BED INNSPG FR LUMEX
$1,220.00
PAT LX FULL HC BED INNSPG FR LUMEX
1 Beds
Robust steel grid deck sleep surface provides superior mattress support and easy to clean surface compared to traditional spring decks
Head and foot sections can be raised or lowered simultaneously or independently with one hand control
Recessed main frame offers maximum pinch point protection between grid deck and frame – reducing the risk of injury
Lightweight design weighs only 126 lbs – lightest bed on the market
Bed setup is so simple that it can save on setup time and requires minimal maintenance keeping your technicians time efficient
Patent pending integrated HI/LO mechanism makes bed height adjustment easy and reduces potential loss of parts such as HI/LO rod when used as rentals
Features dual HI/LO motors to adjust bed height from a low 10"; to 20"; easy and even allows for trendelenburg and slant positioning
Patent pending rail slots in frame ensure quick and proper rail placement
Single motor unit is designed for easy installation, requires less maintenance and provides the ultimate in quiet, smooth head and foot articulation
Attractive, “home-like” thermo fused bed ends offer a less institutional look and eliminate a bed component that often requires frequent repair and maintenance
Features SilverSolutions- an anti-microbial technology built into the paint that protects against bacteria and odor
During a power failure, the motor can lower both the head and foot section with just a single 9 volt battery
4"; extension kit can be installed on head, foot or both to extend bed length to 84"; or 88";
Proudly made in the U.S.A.
Grid Deck offers the following advantages:
Much stronger frame
Better mattress support
No spring sag or bottoming out with heavier patients
Easier to clean
No connecting links or springs to lose
Warranty:Bed Frame: 5 YearsElectrical Components: 2 YearsAll Other Durable Components: 1 Year
Technical Specifications
Total bed weight assembled:
126 lb
Maximum patient weight
350 lbs EVENLY DISTRIBUTED
Learn More$1,220.00
- Availability: in stock
US6000-PKG